Comparison of ozonation and coagulation decolorization methods in real textile wastewater


Aydın M. İ. , Yuzer B. , Ongen A., Okten H. E. , Selcuk H.

DESALINATION AND WATER TREATMENT, cilt.103, ss.55-64, 2018 (SCI İndekslerine Giren Dergi)

  • Cilt numarası: 103
  • Basım Tarihi: 2018
  • Doi Numarası: 10.5004/dwt.2018.21880
  • Dergi Adı: DESALINATION AND WATER TREATMENT
  • Sayfa Sayısı: ss.55-64

Özet

Several treatment approaches such as ozonation, metal coagulation, (ferric chloride and alum), polymer treatment (Polyethylene polyamine, PP, and Cyanoguanidine Polymer, CP) and their combinations for decolarization of biologically treated textile wastewater (BTTWW) were applied. Wastewater samples were taken from effluent stream of an activated sludge treatment system in a synthetic-cotton textile factory. Absorbance, color, chemical oxygen demand (COD) measurements were done to determine optimum conditions. At coagulation experiments, neither ferric chloridenoralum decreased the color parameter below the discharge standard. Ozonation was found to be efficient in removing color from BTTWW as color degradation reached steady-state after 10 min. However color standard was met at higher ozone dosages (20 min). Polymer coagulation (200 mg/L) was found to be practical in removing color from BTTWW. Ozonation prior to polymer coagulation (pre-ozonation) not only improved the color removal efficiency but also decreased the required polymer dosage by 75%. Operational costs of ozonation, PP and pre-ozonation-subsequently PP were found to be 0.37 (sic)/m(3), 0.50 (sic)/m(3), and 0.26 (sic)/m(3), respectively.