Preparation of hybrid silica sol-gel coatings on mild steel surfaces and evaluation of their corrosion resistance

Kirtay S.

PROGRESS IN ORGANIC COATINGS, vol.77, no.11, pp.1861-1866, 2014 (Journal Indexed in SCI) identifier identifier

  • Publication Type: Article / Article
  • Volume: 77 Issue: 11
  • Publication Date: 2014
  • Doi Number: 10.1016/j.porgcoat.2014.06.016
  • Page Numbers: pp.1861-1866
  • Keywords: Corrosion, Hybrid coating, Mild steel, Sol-gel, ALUMINA COATINGS, CARBON-STEEL, BEHAVIOR, PERFORMANCE, IRON, 316L


Hybrid silica sol-gel coatings were prepared on mild steel substrate by dip coating technique. The coatings were subsequently heat treated at 200 degrees C in order to improve their corrosion properties. The coating sols were synthesized using Glycidoxypropyltrimethoxysilane (glymo) and Aminopropylethoxysilane (ameo) as precursor materials. Potentiodynamic polarization curves were derived and Electrochemical Impedance Spectroscopy (EIS) measurements were made in NaCl solution. The surface and cross-section morphology of coated specimens were characterized by scanning electron microscopy (SEM). Fourier transformed infrared (FTIR) analysis was used to identify the presence of various functional groups in the coating solutions. A comparison of the corrosion resistance of the coated and uncoated mild steel was presented. The results indicated that the corrosion resistance of the coated mild steel was improved considerably. (C) 2014 Elsevier B.V. All rights reserved.