Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

ANALYSIS OF CEMENT-BASED PASTES MIXED WITH WASTE TIRE RUBBER

MECHANICS OF COMPOSITE MATERIALS, vol.53, no.1, pp.123-130, 2017 (Journal Indexed in SCI) identifier identifier

Mechanical properties of mortar containing recycled asphalt

GRADEVINAR, vol.69, no.10, pp.933-940, 2017 (Journal Indexed in SCI) Creative Commons License Sustainable Development identifier identifier

Evaluation of the mechanical, durability microstructural and mineralogical properties of cement composites treated with waste tire rubber

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, vol.23, no.5, pp.312-320, 2016 (Journal Indexed in SCI) identifier identifier

Characterization of ground slag and borax waste and their effects on the compressive strength of briquettes

CONSTRUCTION AND BUILDING MATERIALS, vol.123, pp.727-733, 2016 (Journal Indexed in SCI) identifier identifier

Assessment of the Material Quality of Damaged Structures after Earthquake in Van, Turkey

Journal Of Materials In Civil Engineering-Asce, pp.1-14, 2016 (Journal Indexed in SCI)

Analysis of Cement-Based Pastes Mixed with Waste Tire Rubber

Mechanics Of Composite Materials, vol.53, pp.1-10, 2016 (Journal Indexed in SCI Expanded)

The effects of pyrite ash on the compressive strength properties of briquettes

KSCE JOURNAL OF CIVIL ENGINEERING, vol.16, no.7, pp.1225-1229, 2012 (Journal Indexed in SCI) identifier identifier

Influence of Activator on the Strength and Drying Shrinkage of Alkali-Activated Slag Mortar

Construction & Building Materials,, vol.23, pp.548-555, 2009 (Journal Indexed in SCI Expanded)

Influence of Fly Ash on the Properties of Asphalt

PETROLEUM SCIENCE AND TECHNOLOGY, vol.26, no.13, pp.1571-1582, 2008 (Journal Indexed in SCI Expanded)

Characterization of Fly ashes and its Effects on the Compressive Strength Properties of Portland Cement

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, vol.15, pp.443-440, 2008 (Journal Indexed in SCI Expanded)

Production of Briquettes from the Golden Horn Sediments Under Thermal and Hydrothermal Conditions

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, vol.19, pp.619-624, 2007 (Journal Indexed in SCI Expanded)

Utilization of gold tailings as an additive in Portland cement

Waste Management and Research, vol.24, pp.215-224, 2006 (Journal Indexed in SCI Expanded)

Preparation of Briquettes from the Golden Horn Bottom Sediments by Hydro-thermal Agglomeration Process

Waste Management and Research, vol.22, pp.100-107, 2004 (Journal Indexed in SCI Expanded)

Articles Published in Other Journals

Utilization of Blast Furnace Slag in Briquette Production

International Journal of Civil & Structural Engineering, vol.1, pp.149-151, 2014 (International Refereed University Journal)

Farklı Tip Çimentoların Sülfat Ortamlarındaki Dayanımlarının İncelenmesi

Yapı Dünyası, vol.122, pp.50-55, 2006 (Other Refereed National Journals)

İnşaat Mühendisliğinde Sürdürülebilir Gelişme

Yapı Dünyası, vol.123-124, pp.50-55, 2006 (Other Refereed National Journals)

Farklı İnceliklerdeki Tras ve Uçucu Külün Çimento Dayanımlarına Etkisi

Mühendislik Bilimleri Dergisi, vol.10, pp.333-337, 2004 (National Refreed University Journal)

Farklı Puzolanik Katkıların Çimento Harçlarının Mekanik Özellikleri Üzerine Etkisi

DOĞUŞ ÜNİVERSİTESİ DERGİSİ, vol.5, pp.147-154, 2004 (National Refreed University Journal)

Haliç Çamurlarının İnşaat Malzemesi Üretiminde Değerlendirilmesi

Yıldız Teknik Üniversitesi Dergisi, vol.2, pp.84-92, 2003 (National Refreed University Journal)

Refereed Congress / Symposium Publications in Proceedings

Utilization of Blast Furnace Slag in Briquette Production

International Conference on Advances in Civil, Structural and Construction Engineering (CSCE), Roma, Italy, 7 - 08 June 2014, vol.1, no.1, pp.54-56

Utilization of Waste Asphalt as an Additive in Mortars

2nd International Conference on Civil Engineering and Architecture, Barselona, Spain, 10 - 11 August 2013

Compressive Strength of Blended Cements Obtained by Replacement with Asphalt and Tyre

10th international Congress on Advanced in Civil Engineering (ACE 2012), Turkey, 1 - 04 October 2012

Utilization of Tyre and Asphalt Wastes as Cement Additive

Progress in Environmental Science and Technology, China, 1 - 04 July 2011

The Effects of C and F Type of Fly Ashes on the Compressive Strength Properties of Briquettes

ISWA Beacon Conference: Strategic Waste Management Planning in SEE, Middle East and Mediterrean Region, Serbia And Montenegro, 1 - 04 December 2009

Properties of Alkali - Activated Slag Mortars

TÇMB 3rd International Symposium Sustainability in cement and concrete, Turkey, 1 - 04 May 2007

Effect of Polypropylene and Steel Fibers to the Abrasion Resistance of Concrete

TÇMB 3rd International Symposium Sustainability in cement and concrete, Turkey, 1 - 04 May 2007

Characterization of fly ash and its uses in portland cement production as an additive

Environmental Issues and Waste Management in Energy and Mineral Production, Turkey, 1 - 04 May 2004

The Effects of Various Industrial Wastes on Compressive Strength Properties of Portland Cement

Environmental Issues and Waste Management in Energy and Mineral Production, Turkey, 1 - 04 May 2004

Characterization of the Borogypsum by XRD, FTIR, DTA-TGA, SEM

Environmental Issues and Waste Management in Energy and Mineral Production, Turkey, 1 - 04 May 2004